Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl AUDIO FORUMS >> General Discussion and Support >> Is this a correct way to test bias on a Tori Jr? https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1517091640 Message started by Ken Rafika on 01/27/18 at 22:20:39 |
Title: Is this a correct way to test bias on a Tori Jr? Post by Ken Rafika on 01/27/18 at 22:20:39 I'm having difficulty figuring out how to bias my Tori Jr to 40mA. I've attached a picture of my meter; probes are in the correct input holes. Am I doing this correctly? |
Title: Re: Is this a correct way to test bias on a Tori Jr? Post by Steve Deckert on 01/27/18 at 23:11:08 If you set the bias voltage (see owner's manual) to 0.825 VDC the tubes will be at 40mA. To test the tubes individually you will need a bias meter. It is important that your entire quad of tubes match within 10% |
Title: Re: Is this a correct way to test bias on a Tori Jr? Post by Ken Rafika on 01/28/18 at 14:16:59 Thanks. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |