Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
AUDIO FORUMS >> General Discussion and Support >> Corner Horn drivers?
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1475883122

Message started by Corey on 10/08/16 at 00:32:02

Title: Corner Horn drivers?
Post by Corey on 10/08/16 at 00:32:02

https://www.decware.com/newsite/zenfestcam.html

What drivers are now being used in the Corner Horns in the "EAST END" picture?

Are they smoother than the other Fostex 6.5's with the tube phase guide?

Corey :)

Title: Re: Corner Horn drivers?
Post by beowulf on 10/08/16 at 07:22:18

Those look like the Omega AlNiCo Hemp drivers. Those are Louis's/Omega's best drivers.

Title: Re: Corner Horn drivers?
Post by Tripwr1964 on 10/09/16 at 14:09:21

thought someone mentioned friday they are parts express mach1 replacements...

http://www.parts-express.com/parts-express-replacement-woofer-for-15-realistic-mach-one-8-ohm--290-184

or maybe that was the driver in the little ob thingy...

Title: Re: Corner Horn drivers?
Post by Donnie on 10/09/16 at 22:38:57

The Mach One drivers are in The imperials. I was the one asking Bob (Zygi) what drivers were in them.

Title: Re: Corner Horn drivers?
Post by Tripwr1964 on 10/10/16 at 00:12:35

ah.... sorry i was thinking west end.

i was very intrigued by the imperials!

Title: Re: Corner Horn drivers?
Post by Palomino on 10/10/16 at 19:39:04

They are Omega drivers. Not sure which one. It's been too long since I heard the drivers with the tube, but these intrigued me enough to ask Steve what they were.

Title: Re: Corner Horn drivers?
Post by Lonely Raven on 10/10/16 at 21:55:52

After hearing those Imperials, I'm seriously considering building one. Only thing is though, I have a couple nice 18" drivers ready...I need to research if I can use one in the big Imp or not.

Title: Re: Corner Horn drivers?
Post by Lin on 10/10/16 at 22:59:27

Omega Alnico HempCone 6.5"