Forums https://www.decware.com/cgi-bin/yabb22/YaBB.pl AUDIO FORUMS >> General Discussion and Support >> Bottlehead PT-5 https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1475736082 Message started by Corey on 10/06/16 at 07:41:22

Title: Bottlehead PT-5 Post by Corey on 10/06/16 at 07:41:22 Will the Bottlehead PT-5 power a 6N1P if one used a resistor to bring down the voltage to 6 volts?  : http://bottlehead.com/product/pt-5-preamplifier-power-transformer/

Title: Re: Bottlehead PT-5 Post by Corey on 10/14/16 at 04:34:19 I have decided on the Edcor R217 to power a 12AV7 in a custom build ZBox. So far here is the parts list : - Edcor R217 - Custom built wood chassis in walnut with a powder coat, black face. - Jensen 3.3 uF copper foil/paper in oil coupling caps - 47uF and 220 uF Solen Fastcap 400V power supply capacitors - 47K carbon composition NOS Allen Bradley cathode/anode resistors - 470K Riken Ohm plate loading resistors - 15 ohm 5 watt Kiwame(lowered filament heater voltage for digital) - 30K 5 watt Kiwame(power supply C-R-C resistor; 100V target B+) - filament heater resistor bypass switch; 10.5v-12v adjustable Yeah! Corey  :)

Title: Re: Bottlehead PT-5 Post by Corey on 10/25/16 at 05:05:12 Bump Thanks for any inconvenience to get to see the custom ZBox yet. Cor

Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved.