Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
AUDIO FORUMS >> General Discussion and Support >> Which size Xhadow plugs for Decware amps?
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1475646197

Message started by pursuitofnow on 10/05/16 at 06:43:17

Title: Which size Xhadow plugs for Decware amps?
Post by pursuitofnow on 10/05/16 at 06:43:17

I'm looking to get some new interconnects with Xhadow plugs and I see they make two sizes (large and small). Which size would best fit the jacks on a zp3 and a se84ufo?

Title: Re: Which size Xhadow plugs for Decware amps?
Post by pursuitofnow on 10/06/16 at 05:27:25

These are the plugs in question. http://www.partsconnexion.com/connectors_rca_xhadow.html

Anyone know?

Title: Re: Which size Xhadow plugs for Decware amps?
Post by Lonely Raven on 10/06/16 at 06:14:39

The Large/Small is how big of a cable you can put into the butt end of the plug, the RCA size is pretty standard. You can even look at the PDF drawings they provide to see for yourself.

The RCA portion is the same, it's just the cable side opening that's different. the 2mm difference in the barrel that covers the cable side really shouldn't make any difference in modern equipment.

Title: Re: Which size Xhadow plugs for Decware amps?
Post by pursuitofnow on 10/06/16 at 14:08:05

Oh ok, I see. I was thinking there may be an issue using the large barrel size if the female jacks on the amp were too close to each other. Cool, sounds like nothing to worry about. Thanks.