Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
AUDIO FORUMS >> General Discussion and Support >> Help refurbishing a pair or rl2 loudspeakers
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1471796938

Message started by Mick on 08/21/16 at 17:28:58

Title: Help refurbishing a pair or rl2 loudspeakers
Post by Mick on 08/21/16 at 17:28:58

Hi guys after some help not sure if this is the correct area of the forum . I'm a new member living in the UK

Picked up a pritty beat up pair of rl 2 radials and looking to refurbish them .

Priority at this stage is to get them back to fully working order and priority work is to replace the radial drivers cones which are both ripped . Also the the brackets the ribbon drivers are attached to do not seem to be original

So my first question to the decware experts are spares available for the r2l ie replacement cones for the radial drivers and new brackets for the ribbons

Any advice welcome

Cheers
Mick

Title: Re: Help refurbishing a pair or rl2 loudspeakers
Post by Mick on 08/21/16 at 18:33:31

Hi thanks Steve .

Strange cannot see your email I'll check all my folders just in case I've missed it

Mick

Title: Re: Help refurbishing a pair or rl2 loudspeakers
Post by Mick on 08/21/16 at 21:07:46

Just to add Steve . All the drivers appear to be functioning perfectly just both radial drivers paper cones have been damaged and what looks to be crued effort to repair them with some type of glue

Title: Re: Help refurbishing a pair or rl2 loudspeakers
Post by Mick on 09/12/16 at 14:14:48

Any luck finding any spares Steve ?

Title: Re: Help refurbishing a pair or rl2 loudspeakers
Post by Steve Deckert on 09/17/16 at 03:29:22

If you could email me pictures of what you have I can get you an estimate on replacements.

Thanks,

Steve
.