Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
AUDIO FORUMS >> General Discussion and Support >> Outboard/Remote control volume/CSP3
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1458306743

Message started by stone_of_tone on 03/18/16 at 14:12:23

Title: Outboard/Remote control volume/CSP3
Post by stone_of_tone on 03/18/16 at 14:12:23

Steve, I sent an email to your new address inquiring about this. However, I figure others might be interested to read it here.

Any chance, with the volume pot board(s) of the new ZTPRE....can you project box one (in an outboard box) and retro-fit wire it in for volume adjustment (IR Remote control from the outboard box) of my CSP3? This would go for Decware Integrated Amps too.....if one chooses to send back to you for the retro-fit. .....Single or Dual volume!

View of board(s) here/design pictures:
https://www.decware.com/newsite/comingsoon.html

PS-the outboard box suggestion stems from their not being enough real estate in the CSP3 chassis to have it in there.

Title: Re: Outboard/Remote control volume/CSP3
Post by stone_of_tone on 03/18/16 at 17:33:38

Thanks for the quick response email Steve. I un-spammed it....just read it.

It's a no go....I figured it doesn't hurt to ask.

I'm going to have it done locally. I realize if I blow any thing up or destroy it....it's on me. 8-)