Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl AUDIO FORUMS >> General Discussion and Support >> Bias wiring for switch on SE84C https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1446830481 Message started by jgs on 11/06/15 at 17:21:21 |
Title: Bias wiring for switch on SE84C Post by jgs on 11/06/15 at 17:21:21 I inherited (so to speak) an 84C that was an earlier kit I assume. The previous owner did about the worst job I have ever seen. Wired wrong, not completed and broken lead on one output transformer. I found a schematic on line and have totally disassembled the unit and wired everything according to schematic and the tutorial videos on You Tube. Also fixed the output transformer. Where I am stumped is the bias switch wiring. Can anyone provide a layout diagram in addition to the schematic? Any help would be appreciated. This is a black chassis unit. No serial # because bottom plate is missing. It did include the wooden box for chassis. Also, the #8 video on You Tube is not available due to some copy right problem?!?! Thanks, Joe |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |