Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
EQUIPMENT FORUMS >> CSP3 >> Csp3 headphones?
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1427852044

Message started by Tripwr1964 on 04/01/15 at 02:33:59

Title: Csp3 headphones?
Post by Tripwr1964 on 04/01/15 at 02:33:59

Would beyer dt880 pro 250 ohm be a good match for my csp3?
Looking to upgrade from my grado sr60's.
Thks

Title: Re: Csp3 headphones?
Post by Lord Soth on 04/02/15 at 19:18:26

I have used the DT 880 ( 600 Ohms) and Beyer T 1 ( 600 Ohms) with my CSP2+ and CSP3.

The results are fantastic.

The CSP3 pairs very well , and is better with high impedance headphones.
The Taboo is the exact opposite.
It pairs very well with low impedance headphones.

250 Ohms is considered to be high impedance territory, so you are safe.

Regards,
LS

Title: Re: Csp3 headphones?
Post by Tripwr1964 on 04/02/15 at 22:34:42

Ls,
Thk you.
Didn't know if I should be going for the 600ohm or if 250ohm would work well. Like the price of the 250ohm version better.

Title: Re: Csp3 headphones?
Post by Lord Soth on 04/03/15 at 14:35:08

http://www.innerfidelity.com/content/comparison-beyerdynamic-dt-880-32-ohm-dt-880-250-ohm-and-dt-880-600-ohm-headphones

The following link should be useful.

It compares the DT880 32 Ohms vs 250 Ohms vs 600 Ohms.

Cheers!

Title: Re: Csp3 headphones?
Post by Tripwr1964 on 05/21/15 at 00:55:58

ended up picking up a used pair of seinnheiser hd650's and like them very much with my csp3.