Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
SPEAKER FORUMS >> DFR65 / DFR8 / FRX / FRX2 >> FRX2 repair...
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1421885165

Message started by Damien on 01/22/15 at 00:06:05

Title: FRX2 repair...
Post by Damien on 01/22/15 at 00:06:05

I have a damaged FRX2 in my Zen open baffle speakers.

The 'foam' edging has a small hole in it. It does not appear to be actual foam though more like a fabric of some sort. Is there any repair or
is a re-edging required?  It's a very small hole and does not affect the sound that I can tell. My fear is that any repair would affect the sound more than just leaving the hole.

Thanks
Damien

Title: Re: FRX2 repair...
Post by Steve Deckert on 02/18/15 at 01:24:48

[smiley=10.gif] Whoops, I missed this one!  Sorry it took so long to find it!  You are of course right, fixing the hole runs the risk of causing a problem whereas leaving the hole is pretty much harmless, especially in an open baffle where there is never excessive air pressure behind it.

Steve

Title: Re: FRX2 repair...
Post by Damien on 02/18/15 at 01:37:03

Thanks Steve,  Good to know that it's harmless. Bugs me though.. I guess I'll just have to get over it  ;)  

Title: Re: FRX2 repair...
Post by 4krow on 05/29/15 at 17:51:21

Was the hole created by damage or wear? And, if it is really small, a dab of some sort of sealant wouldn't affect the sound. The point is to make the repair thin.

Title: Re: FRX2 repair...
Post by Damien on 05/30/15 at 01:09:13

Damage.. it's small and does not seem to grow so I will probably just leave it alone unless it starts getting bigger

Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.