Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl EQUIPMENT FORUMS >> ZP3 / ZMC1,2,3 >> Will OB3,OC3,OD3 work to replace OA3 in ZP3? https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1401378514 Message started by P K on 05/29/14 at 16:48:33 |
Title: Will OB3,OC3,OD3 work to replace OA3 in ZP3? Post by P K on 05/29/14 at 16:48:33 Will OB3,OC3,OD3 work to replace OA3 in ZP3? Will the sound change and in what way? Thanks, Peter |
Title: Re: Will OB3,OC3,OD3 work to replace OA3 in Post by mark58 on 05/29/14 at 17:00:35 Pretty sure the answer is yes. When I first got my ZP3 and Torii MK IV and was seeing what my tube rolling options were, there was a nice write up of what to expect with each one. After reading the descriptions, I decided that the OA3 sounded like what I would prefer, so I haven't changed it since putting in NOS RCA versions in November 2013. Not sure where the write up was...do a search. Mark. |
Title: Re: Will OB3,OC3,OD3 work to replace OA3 in ZP3? Post by P K on 05/29/14 at 17:22:25 In my Mini Torii I am using a pair of OC3A (blue dancing glow off the getter). The sound is slightly better than a OA3. Should I try it in my ZP3? Peter |
Title: Re: Will OB3,OC3,OD3 work to replace OA3 in ZP3? Post by Lon on 05/29/14 at 17:37:00 They all work in the Torii, and there's less and less "push" and "volume" from the lower frequencies as you go from A to B to C to D. The Torii Mk III page mentions these tube types and their effects. I don't know where that page is any longer however. The tubes sound different in their short straight and taller bottle-shaped versions. They can be rolled to fit room tendencies and other tubes in the complement. I used to prefer the straight bodied OA3s, then moved to bottle-shaped OA3s, and in my new home bottle-shaped OB3s work amazingly well I found a pair of Arcturus that are da bomb, RCA has previously been my brand of choice. |
Title: Re: Will OB3,OC3,OD3 work to replace OA3 in ZP3? Post by mark58 on 05/29/14 at 18:04:00 Here's part of a post from Will in the past...maybe he'll comment. Mark. PS...here's the Torii MK III manual...Tube substitutions are mentioned on page 4 https://www.decware.com/newsite/TORIIMK3Manual.pdf " Going from OA3 to OB3, OC3, and OD3 will progressively chill the bass and open the sound. In this case, I might go extreme and try some nice OD3 VRs. They are generally pretty cheap and make a big difference by calming down the power tubes I believe. I have used 40s and 50s Hytrons and found them very nice, but others from that period are probably good too." |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |