Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
EQUIPMENT FORUMS >> ZP3 / ZMC1,2,3 >> ZP3 & ZMC1 transformer
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1398397227

Message started by Dixlon on 04/25/14 at 04:40:27

Title: ZP3 & ZMC1 transformer
Post by Dixlon on 04/25/14 at 04:40:27

Hello to all,

I have a question about ZMC1 transformer. I'm looking to purchase the EMT TSD15 N cartridge. It is classified as a medium output cartridge.
The Specs are below:
 Stylus tip radius (µm) 6
 Diamond/saphir Diamond
 Tracking force (mN) 20-30
 Mono/stereo Stereo
 Impedance 2 X 24 Ohm
 Output transfer level (mVs/cm) 0,21/channel
 Frequency response (Hz) 20...30000
 Cross talk min. 25 dB
 FIM max. 0.5%
 Vertical tracking angle 23° (±3°)
 Compliance 15 µm/mN
 Eff. stylus tip mass ca. 1 mg
 Tone arm connection EMT tone arm
 Weight (g) 17.5
Will this cartridge work with the ZMC1. I have the ZP3 and my turntable is the Pro-Ject Xtension 12 Turntable.

Thanks all for the advice. :)

Regards,

Kirk

Title: Re: ZP3 & ZMC1 transformer
Post by marky on 04/25/14 at 20:53:03

Dixion, the ZMC1 looks the right one but best to double check. Specifying the cart when ordering will ensure the correct match up. Great choice of cart, lucky ZP3 ! 8-)

Title: Re: ZP3 & ZMC1 transformer
Post by Dixlon on 04/25/14 at 23:46:18

Thanks Marky for your response. I spoke with my local Hi-Fi shop and they said when I have the EMT cart to test it out to see how it sounds.

Title: Re: ZP3 & ZMC1 transformer
Post by marky on 04/28/14 at 10:21:14

I`ve read nothing but good things about EMT gear. The carts have an appeal that I`m very interested in and have tried to locate a JSD at a good price, but as with some of these specialist carts there are only one or two outlets for them, or one that I can find, so no price comparisons.
lol it`s easy to be picky when you window shop.
Please let us know your impressions. I guess it comes down to the vibe and depth it gives you.