Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
OLDER DECWARE GEAR SUPPORT >> TORII MK III >> Impedance switch, which position for 4 or 8 ohms
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1374379948

Message started by Valentin on 07/21/13 at 05:12:28

Title: Impedance switch, which position for 4 or 8 ohms
Post by Valentin on 07/21/13 at 05:12:28

Hi, I own the TOR II Mk 2 amps and I wonder, which is the 4 ohm or 8 ohm position of the impedance switch at the back, next to the binding posts. Is 4 ohm toggled the switch towards the front (where the transformers are), or towards the back. I wonder, because I can hear a considerable difference between the two positions and I want to have certanty about which impedance I am using. Thank you for helping me.

Title: Re: Impedance switch, which position for 4 or 8 ohms
Post by Lon on 07/21/13 at 11:05:50

Use the one that sounds best! :)

I'm 99 percent sure that the 4 ohmn is with the switch towards the front.