Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
EQUIPMENT FORUMS >> ZP3 / ZMC1,2,3 >> ZP3 and ZMC1 Arrived Today
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1360724236

Message started by JeffS on 02/13/13 at 02:57:16

Title: ZP3 and ZMC1 Arrived Today
Post by JeffS on 02/13/13 at 02:57:16

After a wait of many weeks they are here! However I'm not sure which are the input jacks and which are the output jacks on both units. The on-line manual for the ZP3 shows the jacks on the front, labeled as to input and output, but mine are on the back. No manual for the ZMC1 to indicate ins and outs. Can anyone help?

Title: Re: ZP3 and ZMC1 Arrived Today
Post by Lon on 02/13/13 at 03:29:09

facing the front of the amp, the inputs are on the right of the back, and the output on the left of the back.

Congrats! You're going to be very happy.

Title: Re: ZP3 and ZMC1 Arrived Today
Post by JeffS on 02/13/13 at 04:37:13

Thanks Lon. Same for the ZMC1 probably? I'll have it connected and breaking in tomorrow!

Title: Re: ZP3 and ZMC1 Arrived Today
Post by Lon on 02/16/13 at 16:20:53

I haven't needed the step up transformer, but I would assume so. Hope you got it up and running. Would love to hear your impressions.

I just love my ZP3 . . . It works so very well with my Rega RP3.

Title: Re: ZP3 and ZMC1 Arrived Today
Post by marky on 02/16/13 at 21:28:31

Heyy Jeffs, congrats.
Inside rca`s `in`, ..outside `out`both units.
These beauties will need a little-burn in time.
To think this glorious sound is coming through
the ZP3 & ZMC is just......

Title: Re: ZP3 and ZMC1 Arrived Today
Post by JeffS on 02/16/13 at 21:38:11

Thanks for the help. Had them up and running right away with Lon's input and trying it both ways on the SUT. I've been listening through them and assume burn in is needed, but have quite a bit of tube rush sound. I don't think it's a ground loop hum since it gets louder with higher volume settings.

Title: Re: ZP3 and ZMC1 Arrived Today
Post by Lon on 02/21/13 at 01:32:50

Hope the hum has subsided! (?) I've been lucky with the ZP3 and haven't had any hum or noise problems of import. I have been enjoying mine as my vinyl system settles in, I spin record after record some days. Just get drawn in. You could have some great sounds ahead of you.