Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl AUDIO FORUMS >> General Discussion and Support >> bad bias switch on se84cs https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1358297186 Message started by trench on 01/16/13 at 00:46:25 |
Title: bad bias switch on se84cs Post by trench on 01/16/13 at 00:46:25 I was wondering how I could get a new bias switch for my se84cs. It seems to be a little dirty I have tried cleaning it but I keep getting some fuzzy noise every once and a while and just now I wanted to change the setting to the front position and noticed less output on one of my speakers. I can solder and fix it myself. |
Title: Re: bad bias switch on se84cs Post by Steve Deckert on 01/16/13 at 03:20:37 Mouser.com part# 108-1MD1T2B3M1QE-EVX http://www.mouser.com/search/refine.aspx?Keyword=108-1MD1T2B3M1QE-EVX |
Title: Re: bad bias switch on se84cs Post by trench on 01/16/13 at 23:44:34 Thank you Steve, I have always had it in the front position and wanted to give it a good listen in the front position. Even with my left channel a little lower the imaging and soundstage were better than I ever heard, I could get a sense of the holographic imaging you talk about ,made me smile. If I sent it in to get the cce mod would you test it to make sure it's to your specs? |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |