Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
AUDIO FORUMS >> General Discussion and Support >> SE34I.3 Questions
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1356885871

Message started by RJR on 12/30/12 at 16:44:30

Title: SE34I.3 Questions
Post by RJR on 12/30/12 at 16:44:30

Does the SE34I.3 have a 16 ohm tap option?

Lets say down the road you decide to hook up powered subwoofer(s). If you did not opt for the optional outputs, can it be done?

Thanks

Title: Re: SE34I.3 Questions
Post by opnly_bafld on 12/30/12 at 18:56:04

"Does the SE34I.3 have a 16 ohm tap option?"

I don't think so, here is the owners manual comment:

The SE34I.3 is designed to have it’s maximum power into 8 ohm speakers. That does not rule out all 4 or 6 ohm speakers, or 12, and 16 ohm speakers. It simply means that statistically it will work best with around 8 ohms. Since the only thing that happens when you get a lot higher or lower than 8 ohms is the power output goes down, having efficient speakers may make this completely a non-issue. You can not hurt the amplifier by hooking up speakers that are more or less than 8 ohms.

"Lets say down the road you decide to hook up powered subwoofer(s). If you did not opt for the optional outputs, can it be done?"

Yes, you can add a powered sub to any stereo.