Forums https://www.decware.com/cgi-bin/yabb22/YaBB.pl AUDIO FORUMS >> General Discussion and Support >> ZTPRE support https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1348286632 Message started by Audioqwest on 09/22/12 at 05:03:51

Title: ZTPRE support Post by Audioqwest on 09/22/12 at 05:03:51 I just picked up one of these and it sounds pretty amazing. The person before changed a couple caps and eliminated the wiring to the switch for the coupling caps. Also, the bias switch seems to produce a duller sound when put on aggressive. My question is, can someone provide me a wiring diagram? I'd like to confirm nothing has been connected incorrectly and might just hook it back up to the factory arrangement Thanks in advance. PS - using it with a Theta transport/DAC, Bryston amp, and Apogee Scintilla (1 ohm) speakers. Breathtakingly transparent now!

Title: Re: ZTPRE support Post by Steve Deckert on 09/22/12 at 23:22:29 Hi Audioqwest, Welcome to the forums! Steve

Title: Re: ZTPRE support Post by Audioqwest on 09/23/12 at 01:11:15 Thanks again!

Title: Re: ZTPRE support Post by Audioqwest on 09/23/12 at 01:45:08 Sorry, 1 more question if that's ok. How many K are the stock volume pots supposed to be? These ones have been changed to a stepped type, and don't always allow a fine enough adjustment, so I suspect they may not be correct. Thanks for the help yet again

Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved.