Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
EQUIPMENT FORUMS >> MINI TORII >> UNSUNG FEATURE OF MINI TORII - OUTPUT JACKS
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1344086484

Message started by Rivieraranch on 08/04/12 at 14:21:24

Title: UNSUNG FEATURE OF MINI TORII - OUTPUT JACKS
Post by Rivieraranch on 08/04/12 at 14:21:24

I recalled that the MINI TORII has the output jacks to feed the signal, along with the amp's sound signature. So I connected the outputs to the input of my CSP2+. Strangely, it sounds a lot better than the CD player connected directly to the CSP2+.

Title: Re: UNSUNG FEATURE OF MINI TORII - OUTPUT JACKS
Post by Hank on 09/07/12 at 22:07:09

Hi, Jim

I'm not fully understanding the output function. If you want to drive the CSP2 or another amp, do the speakers need to stay connected to the MINI?

Normally, I wouldn't expect you could power up an amp without a speaker load.

Regards,
Hank

Title: Re: UNSUNG FEATURE OF MINI TORII - OUTPUT JACKS
Post by Rivieraranch on 09/08/12 at 01:41:33

I've always kept the speakers connected. I turned down the volume controls nearly all the way and let the CSP2+ handle the amplification for the headphones. The output jacks are designed to drive another amp or something else, with the speakers connected.

Title: Re: UNSUNG FEATURE OF MINI TORII - OUTPUT JACKS
Post by erik2a3 on 09/29/12 at 20:07:06

The line level output is taken off the opt via a dropping resistor. It's an extremely useful feature, and one I have added in the past with other amplifiers. I used it from day one to drive a subwoofer amp.