Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Housewrecker Support Forum >> Anyone scale and use JL Audio 18W6's in a HWK?
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1338980545

Message started by spanyerd on 06/06/12 at 12:02:25

Title: Anyone scale and use JL Audio 18W6's in a HWK?
Post by spanyerd on 06/06/12 at 12:02:25

New to the forum (obviously) and am looking for opinions and help. I bought the plans for the 15" version, but I have four new 18W6's sitting around. They may not be ideal for this application but I'm hoping they'd at least be acceptable. The T/S numbers are below. I would gladly pay for pro plans. Thanks in advance!

Fs (free-air resonance): 20.0 Hz
Qts (total speaker “Q”): 0.384
Qes (electrical “Q”): 0.402
Qms (mechanical “Q”): 8.740
Vas (equivalent compliance): 9.00 ft3 254.9 liters
Xmax (linear excursion one-way): 0.500 in. 12.7 mm
Efﬁciency (1W/1m)*: 88.8 dB
Sd (effective piston surface area): 182.6 in2 0.1178m2
Re (DC resistance): 11.04 Ω (in series)
Znom (nominal impedance): Dual 6 Ω
Pt (continuous thermal power handling): 500 Watts

Title: Re: Anyone scale and use JL Audio 18W6's in a HWK?
Post by Ronnie Richards on 07/11/12 at 12:35:54

Well have you made connections? If yes then please try to tell me..