Forums https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR ZKITS >> ZKIT 1 Support forum >> Hazen Grid Mod for ZKIT1 https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1331833198 Message started by Hank on 03/15/12 at 18:39:58

Title: Hazen Grid Mod for ZKIT1 Post by Hank on 03/15/12 at 18:39:58 I have assembled the kit "breadboard" style.  There is a photo of the project in an earlier post in this forum. What do I have to do to apply the Hazen Grid Mod? Thank you, Hank Sundermeyer Newark DE

Title: Re: Hazen Grid Mod for ZKIT1 Post by Hank on 03/17/12 at 17:39:10 I'm still hoping for help on this... I tried to upload an 128KB JPG image, but it wouldn't go. The PCB has spots for a .1uF cap on each channel, which weren't in the parts inventory therefore not in the circuit..  I'm looking for conformation this is where the CCE (Hazen Grid) Mod goes and that are no other mods to the PCB needed. Unfortunately, the foil trace images in the instruction manual don't match the PCB I have which tells me there are several versions of the PCB. What are the proper values for the capacitance and voltages. The PCB is Rev 9-2010 Any help would be surely appreciated. Regards, Hank Sundermeyer Newark, DE

Title: Re: Hazen Grid Mod for ZKIT1 Post by Rivieraranch on 03/18/12 at 02:59:35 This is the PC board Uploaded with ImageShack.us This is the other side Uploaded with ImageShack.us

Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved.