Forums https://www.decware.com/cgi-bin/yabb22/YaBB.pl OLDER DECWARE GEAR SUPPORT >> ZCD240 >> Problemn with older ZCD https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1323527469 Message started by UncleDave on 12/10/11 at 14:31:09

Title: Problemn with older ZCD Post by UncleDave on 12/10/11 at 14:31:09 I have an older ZCD (in fact I believe it is one of the prototypes) which does not seem to be putting out enough signal strength. The system used to respond at very low volume levels but now I must turn the volume way up to hear anything and that anything is not very good and it's accompanied by a low frequency hum. I have tried replacing the tube but no improvement. Is there anything I can check or does it go to the shop?

Title: Re: Problemn with older ZCD Post by Steve Deckert on 12/11/11 at 22:03:36 Hi Dave, If you've replaced the tube with a known good tube, then it's time to send it back to the mothership. Steve

Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved.