Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR ZKITS >> ZKIT 1 Support forum >> channels are backwards. https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1322949496 Message started by coopercustoms on 12/03/11 at 21:58:16 |
Title: channels are backwards. Post by coopercustoms on 12/03/11 at 21:58:16 My left and right are flipped. I have checked and checked until my eyes crossed and can not find a wiring mistake on the inputs or outputs. sounds awsome and phasing is correct, but ca'nt help but wonder what I did wrong. Could it be something on the board? |
Title: Re: channels are backwards. Post by Kaloyanr on 12/04/11 at 06:33:05 it depends on which side you look at them! ;-) |
Title: Re: channels are backwards. Post by MarkO on 02/16/14 at 01:39:32 I've experienced this as well - do the speaker outputs match the input they're next to, or are these flipped? |
Title: Re: channels are backwards. Post by 4krow on 02/18/14 at 00:08:04 I had this issue numerous times over the years due to a mistake that I made somewhere. Whenever possible, I just flipped them back where they belong at the output. The signal doesn't care as long as it all comes out the right end. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |