CABLE FORUMS >> DSR - Decware Silver Reference Interconnects >> 2m lengths available?

Message started by DougK on 05/26/11 at 13:53:02

Title: 2m lengths available?
Post by DougK on 05/26/11 at 13:53:02

I'm interested in the Decware interconnects, but just can't have my equipment close enough that 1m is a long enough cable.  Are 2m versions available?

I was actually quite surprised to see that 2m versions were not available, especially with scome units like the Torii that have the left and right input jack separated by a significant length.  Placing my CD player next to the Torii isn't possible in my setup unless I have a cable longer than 1m.

Title: Re: 2m lengths available?
Post by Lon on 05/26/11 at 14:14:06

I think you'll find that Decware can only supply a 2 meter pair using the former wire they used to use in their interconnects, which while very good is not as good as the Reference. The Reference wire they seem unable to receive in 2 meter lengths.

I also needed a 2 meter cable for my DVR to be fed into the CSP2 or ZBox. I looked around and sought some recommendations and found this silver cable from Audioquest available for 105 dollars in 2 meter length. I have to say it's a very good cable, coming very close to the Decware "sound". . . maybe a tad warmer. Maybe not. I can't decide, it's really hard to hear significant differences between them. May be just the thing. . . .

Title: Re: 2m lengths available?
Post by Steve Deckert on 05/28/11 at 04:28:33

I could do 2 meter cables and would sell a lot of them, however they have a higher capacitance and with some amplifiers could roll the highs.  If you look at the litz construction of the cables the flat silver ribbon if unwound would be around 10 feet long in our 1 meter cable.  2 meters would make it 20 feet.

Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.