Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Wicked One Support Forum >> urgent help!! 15" design!
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1284046513

Message started by blackjack on 09/09/10 at 16:35:13

Title: urgent help!! 15" design!
Post by blackjack on 09/09/10 at 16:35:13

hi guys, used one of these enclousures some time again with a pair of 12" clarion subs and 2000 wrms,,, very nice sounding and not too bad on the db meter... 146.5 if i recall correctly!

anyway!

looking to build another wicked one for a pair of 15" drivers and 5000wrms!! has anyone got a design or be willing to put a design together?

or atleast tell me how to work it out!

Title: Re: urgent help!! 15" design!
Post by blackjack on 09/09/10 at 16:35:42

should have mentioned i have a 39" max width!

Title: Re: urgent help!! 15" design!
Post by HT-EXT on 09/14/10 at 18:16:30

I helped a friend attempt this build. The results were not bad but speaker selection prolly had alot to do with the results. You will need to add the appropriate height to accommodate that size sub. The throat, horn, and ports should still hover around the same size(except in height of course). I would make the sealed and ported parts of the enclosure a little bigger since your limit is 39". Keep the horn measurement based on the 36" wide rule. With only 39" to work with you will need to angle the baffles for the 15"s. If you need more info let me know.

HT-EXT

Title: Re: urgent help!! 15" design!
Post by Hondab100s on 07/25/11 at 00:37:01

I am having somewhat the same situation...but with more room! I was planning on 48"x48"x18" with a pair of Power Accoustik p3-15.
I was thinking of using the same proportions minus the material thickness(tho I'll be using 3/4" as well here). Here is what I came up with...
36"x36" originally...now 48"x48" with same 3/4" MDF to house 15s
8 inches from edge for first measurement.
36-1-1/2"=34-1/2" and 8" equals 4.3125x(48-1-1/2)=
48-1-1/2=46-1/2/4.3125=10.78"...10-3/4sounds good

next is the bottom center...4" offset for the 36" model
34.5=4"
46.5=5.4"-new measurement

34.5=2" in corners
46.5=2.7"

and with that I get this...how does it look?
oops I can't post lol sorry...but what do you think of the numbers?