Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl AUDIO FORUMS >> Replacement Tubes >> Subbing in 6CG7 for 12AU7 (mini-Torii) https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1278707894 Message started by hifitubes on 07/09/10 at 21:38:14 |
Title: Subbing in 6CG7 for 12AU7 (mini-Torii) Post by hifitubes on 07/09/10 at 21:38:14 1. I'm curious about trying some adapters for the mini-Torii to use 6CG7 in place of the 12AU7s. Found this online, and would like some input, sounds like adapters and just drop it in, the "if" is the 2nd quote : Quote:
Quote:
2. I'd also like to hear if the extra heater current for the E80CC (2x filament current) or 12BH7 excludes them from use in the torii. Has the circuit been specifically optimized for the 12AU7? With no room for the 2x filament current draw, if so it would seem that the 5814 or possible the adapter for 6CG7 would be the path to explore. It's amazing how much discussion there is online about how non-linear the 12AU7 is. |
Title: Re: Subbing in 6CG7 for 12AU7 (mini-Torii) Post by Rivieraranch on 07/10/10 at 01:24:05 Why wouldn't you not just pop in a 12AT7 or 12AX7 variant to get the input signature you like? The 6CG7 is a substitute for the 6922. It is a poor substitute indeed, lacking in verve and dynamics. |
Title: Re: Subbing in 6CG7 for 12AU7 (mini-Torii) Post by hifitubes on 07/10/10 at 01:49:50 I think you have the 6CG7 confused with another valve. I do have some 7062 I'm going to try soon. |
Title: Re: Subbing in 6CG7 for 12AU7 (mini-Torii) Post by Rivieraranch on 07/10/10 at 04:02:48 I tried some 6CG7 in my MLB and they sounded weak, laid back and not satisfying. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |