Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR ZKITS >> ZKIT 1 Support forum >> Success! https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1274997175 Message started by Hank on 05/27/10 at 22:52:55 |
Title: Success! Post by Hank on 05/27/10 at 22:52:55 Completed the ZKIT1 today and it woiks! I've ordered 83's but had some EL84's to test it with a 6922 input I saw the test voltage tolerances...but these were mine: A = 325vdc B = 283vdc C = 12.7vdc D = 2.94vdc and 2.95vdc 0 detectable hum at full gain with some inefficient test speakers. Now I'm waiting on my CSP2 to arrive... Regards, Hank |
Title: Re: Success! Post by Evo on 06/16/10 at 12:51:55 Well done Hank. BTW, I found that the 83's sounded a lot better on my system than the EL84s - tons more detail and realism, so that might be a good little upgrade. Any pics of your build? Matt |
Title: Re: Success! Post by Hank on 06/17/10 at 21:22:29 Thanks, Matt It won't win the arts and crafts award, but it sounds great! The "science fair" look sort of grows on you after a while. ;) I've been using the CSP2 as a preamp between the SET amp and a CD deck. Wondering iif upgrading my speakers with the Decware shelf speakers will net a big difference 89dB vs. 94dB sensitivity. Regards, Hank |
Title: Re: Success! Post by Hasafraker on 07/09/10 at 15:20:59 I run my amp into a pair of these http://www.tektondesign.com/Model81en.html they sound ridiculously good and they will quite easily shake the walls. I can't wait to hear my zsp1 along with it when that's completed. ;) |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |