Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR ZKITS >> ZKIT 1 Support forum >> Need Help with this.... https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1274744301 Message started by Hank on 05/25/10 at 00:38:20 |
Title: Need Help with this.... Post by Hank on 05/25/10 at 00:38:20 Are these resistors in the right place for these values: From left to right: 2.7K, 1.5K, 1.5K, 2.7K On the PCB they are between the preamp tube socket and the gain pot. Thanks Hank |
Title: Re: Need Help with this.... Post by Alan H on 05/25/10 at 18:32:36 This image has the resistors on the other side of the board from the tube holder. You should be able to work it out though ... |
Title: Re: Need Help with this.... Post by Hank on 05/25/10 at 21:34:44 Alan Thanks for the image. I checked the resistance on a multimeter before soldering them into place. But on making a final check with those resistors in place, the readings were different than specified. A quick check with Steve reminded me those resistors were wired in parallel and would not give rated values. When all else fails....check the schematic! Hank |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |