Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl AUDIO FORUMS >> General Discussion and Support >> speaker - amp match https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1268055691 Message started by agustinf on 03/08/10 at 13:41:31 |
Title: speaker - amp match Post by agustinf on 03/08/10 at 13:41:31 Hi, I know there´s a recommended speaker list to match Decware amps, and there´re a fine Decware speakers. I nevertheless wanted to know about your own attemps in matching two Dec amps, if you´re so kind to share them here. 1. Torii III 2. SE34I.2 Best Agustín |
Title: Re: speaker - amp match Post by Lon on 03/08/10 at 14:04:05 I have both these amps. I've used them with two sets of speakers, the Radial R2s and the IT Radials (you won't find that speaker on this website, it's a Bob Zeigler product). Both amps work well with these speakers. If you have a small room and don't need to blast your music, the Integrated will work well with most speakers about 91db efficient and above if there are no complex crossovers to drain a lot of oomph. The Mark III will allow you to get larger sound levels from the same speakers, and will drive many sets of speakers well. The Integrated will be just a tad more "laid back" but otherwise the two amps share a rather spectacular clear and involving sound character. |
Title: Re: speaker - amp match Post by agustinf on 03/10/10 at 04:28:15 Thanks Lon! Best Agustín |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |