Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
EQUIPMENT FORUMS >> MINI TORII >> Output Jacks on Mini Torii
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1265686693

Message started by Rivieraranch on 02/09/10 at 03:38:12

Title: Output Jacks on Mini Torii
Post by Rivieraranch on 02/09/10 at 03:38:12

How strong is the signal from the RCA output jacks? I tried connecting the output jacks on the Mini to the input of my CSP2 to listen through headphones. This was instead of connecting the source directly to the CSP2. I turned the volume on the CSP2 all the way up and heard virtually nothing.

Title: Re: Output Jacks on Mini Torii
Post by Steve Deckert on 02/09/10 at 17:40:32

The signal coming from the output jacks of the mini torii is tied to the mini torii's volume control. The signal is extra strong too.

Steve

Title: Re: Output Jacks on Mini Torii
Post by ddemy on 02/09/10 at 20:54:31

Hello Rivieraranch: To echo Steve’s answer; I am also using the output jacks on the MiniTorii to feed an early generation “Headroom” headphone amp using Grado phones. I only need to have the MiniT volume pots set at 2 clicks,... with headphone amp volume pot at 9 o’clock position and it gets plenty loud , at least for me. Should mention that my MiniT was shipped with 12at7’s , so may have a lil’ more gain. May I also add, is the first time that I’ve experienced holographic imaging wearing headphones….what a ride that was,..or continues to be..

Title: Re: Output Jacks on Mini Torii
Post by Rivieraranch on 02/10/10 at 02:31:31

I tried again tonight and they are not working right.

Title: Re: Output Jacks on Mini Torii
Post by ddemy on 02/18/10 at 18:40:23

Hello Rivieraranch, Did you ever resolve the issue with the output jacks on the MiniTorii not being able to supply signal to headphones via the CSP2 inputs? Was interested in the final outcome on that one.....thanks ddemy

Title: Re: Output Jacks on Mini Torii
Post by Rivieraranch on 02/19/10 at 00:38:41

I am sending the unit back to DECWARE for a look-see. Spoke to Steve. Because my unit was a prototype the preamp outputs were probably not connected. They will hook the outputs up and in addition, I will get a second pair of inputs added. I will miss it while it is gone.

Title: Re: Output Jacks on Mini Torii
Post by ddemy on 02/19/10 at 15:56:51

Makes sense, & prototype explains it....was thinking it had to be an un-connected circuit as u suspect , since there was zero signal with no other obvious symptoms...yes, I understand your audio dilemma of missing it while it's gone, since it is an amazing sounding amplifier.