Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl AUDIO FORUMS >> General Discussion and Support >> Zkit Preamp and CSP2 questions...?? https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1258331381 Message started by Eleveniseven on 11/16/09 at 00:29:40 |
Title: Zkit Preamp and CSP2 questions...?? Post by Eleveniseven on 11/16/09 at 00:29:40 Looking at the two very seriously, I am really wanting to build the Zkit preamp, but i wondered where it stacked up against the CSP2?? does anyone know? I dont care about having a headphone out. Its going to be the start of my hifi system I am building (piece by piece). thank you to anyone who replies. Richie |
Title: Re: Zkit Preamp and CSP2 questions...?? Post by Steve Deckert on 11/17/09 at 22:47:09 Hi Eleveniseven, The ZSP1 preamp kit has a lot of gain making it ideally suited to drive tube gear that needs 2 ~ 5 volts on the inputs. With regular amps that only need 1 volt, the ZSP1 will be too hot. It can be modified to use only the two final tubes as a near unit buffer which solves this problem with normal amps. The CSP2 has an adjustable output level that allows it to be dialed in to any amplifier. As a line level preamp, it is more transparent than the ZSP-1 with better control over dynamics. Even for non-headphone lovers, you may find that having the headphone jack is nice when you hear something in a recording that doesn't sound right and are trying to figure out if it's the recording, amp, or speakers. Steve |
Title: Re: Zkit Preamp and CSP2 questions...?? Post by Eleveniseven on 11/18/09 at 03:19:21 thanks for the information. i do understand what you are saying. there is a lot to learn when looking into the tube world. lots of smoke...thats why i like your site. there is no smoke, just information straight and plain. i am really interested in the kits you have listed, for 2 reasons, one i just cant afford to pour out the money it takes to get into this on any respectable level, plus i love to build my own things. i really apprecaite the information. i will for sure be along soon to buy my first piece of tube gear from you. I cant wait. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |