Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SPEAKER FORUMS >> DFR65 / DFR8 / FRX / FRX2 >> Some feedback https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1247671108 Message started by Steve Deckert on 07/15/09 at 16:18:28 |
Title: Some feedback Post by Steve Deckert on 07/15/09 at 16:18:28 Quote:
Mario, Thanks for the feedback... I've gotten similar feedback from every Abby owner who has tried them! While a typical 9 pin preamp tube is standard, I find that using a longer 9 pin tube, such as an EL84 for example, makes even further improvements in focus. The efficiency does go down a bit, but in reality it stays the same. The perception is due to reduction of midrange peeks that were adding an artificial presence. Please keep us updated with any further observations you might have as you continue to use them. Steve |
Title: Re: Some feedback Post by jameskk on 03/19/11 at 18:51:49 dear Steve I have also built a pair of voight pipes to install your DFR65 and am thrilled ,not the bass response of the audio nirvana cast 10's which i also own and built (2.8)'s . I have a Zen on each, new one from you via Jeff Collura and a earlier 2004 ( serial 249) select from audiogon . Needless to say im veeeery happy with both systems . Question is how long for breakin of the DFR65. Sounds great now , with only about 50 hours on them . thanks. reason for building the pipes? wanted to see what a 1930 design sounded like.............. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |