Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Deathbox Support Forum >> DBK212 question about woofer mounting
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1242069101

Message started by John Scherer on 05/11/09 at 20:11:41

Title: DBK212 question about woofer mounting
Post by John Scherer on 05/11/09 at 20:11:41

When running two woofers in the dbk212, I have read through the forms that they are in a clamshell configuration. It seems that some have used panel B as the spacer between the two woofers but my woofers won't fit inside on panel B.

So is it ok to mount on the topside of panel B, cones facing each other, separated by a spacer. I made a ring from 3/4" MDF to use for this separation.

It seems that when running with two woofers you loose a great deal of tuning space within the cabinet. Does this present any problems?

Thanks

John

Title: Re: DBK212 question about woofer mounting
Post by HT-EXT on 05/13/09 at 13:50:46

It will not cause a problem. The insert is often place low in the enclosure for low tuning. With the insert being adjustable you can tune the enclosure for optimun performance. Just my two cents.

HT-EXT