Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl OLDER DECWARE GEAR SUPPORT >> SE84A, SE84B, SE84C, SE84C+,SE84CKC >> se 84+ rectifier roling https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1237297901 Message started by Jaap on 03/17/09 at 14:51:40 |
Title: se 84+ rectifier roling Post by Jaap on 03/17/09 at 14:51:40 Se84+ users! I like to hear from your experience rolling an 274B rectifier on the se84+ amp? Does anny 274b work well without modifications? Kind Regards, Jaap |
Title: Re: se 84+ rectifier roling Post by Crazy Bill the Eel Killer on 04/20/09 at 04:09:33 Hello Jaap, First, Welcome to this forum ! Second, I have a highly modified SE84CSEX, and I absolutely LOVE the Valve Art 274b rectifier in my amp. But, be careful, as the specs for the 274b ( as I recall from memory ), calls for a max cap value after the rectifier of 4uf . While I ( and others ) haven't blown one up yet, the PS as configured in your amp has a 40uf cap after the rectifier, which, by the specs is way too high. But the Valve Art is fairly inexpensive ( approx. $ 15.00/ea ) , so I would go for it with the VA 274b. I would not do it, however, with a NOS Westinghouse based upon their outrageous cost. Try the VA, and if you like it, do it ! There are some easy mods you can do to lessen the load on the 274b ( and make a better PS, IMHO )you can do later if you like. Cheers, Crazy Bill :) |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |