Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Housewrecker Support Forum >> upper port to be placed in front https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1234143725 Message started by bimbo on 02/09/09 at 01:42:05 |
Title: upper port to be placed in front Post by bimbo on 02/09/09 at 01:42:05 Can the upper port be placed in front and not on the top. Will it reinforce the lower ports or will it tend to cancel and thus reduce loudness? Tnx. |
Title: Re: upper port to be placed in front Post by Steve Deckert on 02/10/09 at 00:24:11 It can yes. It does tend to work better as designed, but you shouldn't have any problems. Steve |
Title: Re: upper port to be placed in front Post by HT-EXT on 02/25/09 at 20:18:27 I would try the original design first. It will be easier to replace the top than replace a whole side. I too look for ways to focus the top port output foward instead of up but was not satisfied with any of the results. Try the original and then mod if needed. HT-EXT |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |