Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Wicked One Support Forum >> WO amp for home theater https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1230005433 Message started by babgrip on 12/23/08 at 04:10:33 |
Title: WO amp for home theater Post by babgrip on 12/23/08 at 04:10:33 Amp for home theater use I have completed 24x36 WO and i am waiting for drivers from Steve . My question is what amp to use Parts Express plate amp??? should speakers be wired Series or parralle line in or high level in Current system is Dennon 2307ci recevier Dennon 2910 DVD 50" plasma with magnapan surrounds and a lame klipsch sub hooked up through the LFE input.12'x16x10' dedicated room this system is tv dvd only seperate 2-channel audio system . not looking for boom just tight accurate bass Maggies cross over at 100 hz thanks Ben |
Title: Re: WO amp for home theater Post by HT-EXT on 12/23/08 at 11:36:58 I think the 240w amp is enough but if you want a little more headroom the Bash 500w or the Dayton 500w would work perfectly. With these types of enclosures it does not take alot of power to make them go boom. The two subs offer by Steve seem to be around 8 ohms which is prolly more like 6 to 6.5 ohms. You can get away with running them in parallel which should allow the amp to perform at its best. As for connection to your HT I would use the LFE out and then split it to go into the amp's low end input(usually rca type connection). The plate amps have a left and right low end input. Most instruction say just to use a single input most of the time hooked to left input. I always use a splitter and hook up both left and right inputs. Both inputs are sum together and will help add a little input gain. If you need more info let me know. HT-EXT |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |