Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Deathbox Support Forum >> help me with this litle problem. Im new here
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1224597386

Message started by hamlet on 10/21/08 at 14:56:25

Title: help me with this litle problem. Im new here
Post by hamlet on 10/21/08 at 14:56:25

hi everyone my name is hamlet im from Chile and i found this web looking for subwoofers. my cuestion is this: i buy a subwoofer of brand XXX 10 inch (that's it calls the brand of woofer) and i like to know if this works in the dthbox. PLEASE HELP ME!! i' reali need some information of this, if it works or not, or... not realli works this brand on the desing of the dhtbox, because this is my proyecto to build a subwoofer for a home theater,( and i`realy need then everybody advise me if this work out) :P ;)

Title: Re: help me with this litle problem. Im new here
Post by Valiant on 10/22/08 at 13:29:34

Hi Hamlet,
We really need a few technical details about the XXX subwoofer.
Cheers
Gaz

Title: Re: help me with this litle problem. Im new here
Post by hamlet on 10/23/08 at 17:18:20

Hi valiant, thanks so much for the replay jijiji :), i' think then no one was a replay my litle problem. well, for the details your ask this is are:
Diameter of 10 inches Winds Simple of 2 inches Impedance: 4 Ohms Sensibilidad 88 dB Promotes: 150W RMS (500W Maximum Power) Response of frequency: 45-4000Hz Material of magnet of strontium of 40 Oz. that's all iu found in dhe box and the web, nothing more i' found about this woofer. well I hope you or ani one help me, a want build this dhtbox.....earthquake subwoofer... I think

Title: Re: help me with this litle problem. Im new here
Post by hamlet on 10/29/08 at 15:22:02

what hapen! no one is gonna help me :'(

Title: Re: help me with this litle problem. Im new here
Post by Dirty_Dawg on 10/30/08 at 17:37:08

Don't feel bad, Hamlet. Things seem to be moving kind of slowly these days and even I have become an infrequent poster.

Do you already have the plans for the enclosure design?
I think if you read through the section on this site devoted to this enclosure, you will find that the main point of the design is that it is tunable to get the most out of what ever driver you choose.

Just for your information, though, a driver that only goes down to 45Hz is not a subwoofer, technically, but a woofer more properly. You would be better off with a driver capable of a lower response.

I have only built one DB and I used a driver with a resonance in the 30Hz range, which, to old school guys like me, that's not really a subwoofer, either.

However, I was able to tune the enclosure to a range that was very pleasing and well controlled. With some equalization, I managed to get a nice deep sound out of it.

Title: Re: help me with this litle problem. Im new here
Post by hamlet on 11/05/08 at 14:36:45

thank's so much for te replay. look i have not the planes of the dbx because i' have to pay with credit card and i don't have one :'( >:(mm...and you'r right! this is not a subwoofer, but can works. i hope that someone facilitates the planes to me :P