Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Deathbox Support Forum >> DVC problem!?
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1218441371

Message started by rgorsuch87 on 08/11/08 at 08:56:10

Title: DVC problem!?
Post by rgorsuch87 on 08/11/08 at 08:56:10

Ok I've built a DB for my two audiobaun 12s with DVC. I thought that I had them wired right but it sounds really bad. I've got each one wired four ohms. I thought that I reversed the polarity on the second one but I'm not sure. Can someone please explain how they should be wired up? Thanks

Title: Re: DVC problem!?
Post by Adrian on 08/13/08 at 10:11:00

If you are using 2 in a db you are using the clamshelled, right ?
One should be wired out of phase.

Are the speaker's dvc's ? If so, what ohm load are you looking for ? I would probably wire the coils on each speaker in series and the speakers themselfes in paralel.