Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
AUDIO FORUMS >> Room Treatment >> Building my Sound Room Treatment
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1211918447

Message started by Richard_Basaker on 05/27/08 at 21:00:47

Title: Building my Sound Room Treatment
Post by Richard_Basaker on 05/27/08 at 21:00:47

I hope you can help me Steve, I have been building Sound Room Treatment for my sound room from some old plans that I bought from you some years ago. They were for C.W.A.L., D.W.A.L., S.W.A.L. construction. I started with the C.W.A.L.'S. My question for you is on the Thermafiber that you used, their are lots of different products in the Thermafiber catalog. Do you recall as to the product you used in your units? The size? and density? or maybe a product code number? This will help me finish off these units and start to enjoy my room. When I finish my room I will send photos and comments.

Thanks again,
Richard Basaker

Title: Re: Building my Sound Room Treatment
Post by Steve Deckert on 05/28/08 at 23:19:09

Sure,

You want Termafiber SFAB. Here is the link: http://www.thermafiber.com/uFolder/uploads/TF886.pdf

Steve :)

Title: Re: Building my Sound Room Treatment
Post by Richard Basaker on 05/29/08 at 15:54:20

Good Morning Steve,

Thanks for the information on Therafiber. This will greatly advance my work on my sound room.

Richard Basaker

Title: Re: Building my Sound Room Treatment
Post by Richard Basaker on 08/01/08 at 17:44:59

Good Afternoon Steve,
I finished the C.W.A.L.'S and they work great. If these were used in all sound rooms, or all CES rooms one could only imagine how good the sound would be. One of the best improvements to my sound room ever. I have two questions to ask of you, as to
your sound room. Is this room still in use, or when you moved the company, did your sound room move also? In your 360 of your room the corner shot of the C.W.A.L.'S looks like you put some foam wedges on the front of the units? If so was this an improvement over plain units when using the Acoustats?
Thanks for all your help.
Richard Basaker

Quote:

TUBES ONLY, AND FOREVER!!!

Title: Re: Building my Sound Room Treatment
Post by used-hifi-larry on 08/17/08 at 21:09:02

Hi Steve I am in need of your help with my new room..

The room is 15'X25' an 8" ledge 4' high goes around on one long wall and both short walls my ceiling is 8 and half feet high there is a ceiling protrusion for a beam drywalled in ..in kinda a V if you will....thats a third into the room on the back wall...the floor carpeted thick pad and thick carpet.

I am using my acoustats monitor 4's in the room right now and plan to use the radials too

I hope you can help me i may attend the decfest this year and pick up some diffusers to take back home...

I hope to give you a call this week