Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Wicked One Support Forum >> 8 10" design????? https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1200196922 Message started by badbyrdkoncepts on 01/13/08 at 04:02:02 |
Title: 8 10" design????? Post by badbyrdkoncepts on 01/13/08 at 04:02:02 ok here is my problem, im going to build this type of enclosure for a truck with a shell and a walk through (no back wall). i need to save as much side to side so what i was thinking was instead of building 4 identical boxes (all on end with horns forward horizontally) could'nt i just build one box wide enough for 4 woofers ( 8 total) so the plan would still be a 36"x36"x49.5" this is just the same a s one box but wide enough for the 4 woofers. it would save me alot of would and about 4 inches or so on space? please help if you can. i am very experienced with enclosure building but this will be a totally new design for me. forgive the crappy paint pic but hopefully you get the idea |
Title: Re: 8 10" design????? Post by brian84corvette on 01/13/08 at 06:02:24 thats a cool idea. you would just have to make shure that every single sub is completely sealed in its own special box for the sealed side. if you have all 4 top speakers and all 4 bottom speakers sharing the same ( sealed part ) air space they wouldnt sound so good. but if each speaker has its own air space it might not be so bad at all. |
Title: Re: 8 10" design????? Post by Hotsauce on 01/13/08 at 11:24:11 If each speaker is fed the same signal, what difference would it make if the airspace were summed rather than seperate as long as its the same volume? John C. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |