Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Deathbox Support Forum >> Anyone ever build an isobaric DB? https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1199838213 Message started by SnakeFingers on 01/09/08 at 00:23:30 |
Title: Anyone ever build an isobaric DB? Post by SnakeFingers on 01/09/08 at 00:23:30 Has anyone ever built an isobaric DB? Isobarics let you reduce the volume of the box by about half. I think you would have to start with a pre exisating DB as a reference, use the same drivers, decrease the height of the box, and tune it accordingly. Just curious... |
Title: Re: Anyone ever build an isobaric DB? Post by PC on 01/14/08 at 21:14:48 You must be talking about a DBK10? The DB212 is isobaric already (2 drivers coupled by air cavity) - but you knew this right? Maybe to your interest, I have built a DB210 (2 x 10") and am very happy with the results. The drivers were not the ones Steve suggests; mine were more suited to a reflex enclosure, but coupling them has given me a result in a box modelled off the DB212 size and shape that I am happy with. A few advantages of Isobaric is lower mechanical distortion, and as you said, halving volume required for enclosure, and doubling the power handling for your speaker/sub. A disadvantage is the efficiency of isobaric config drops 3db compared to the single driver. |
Title: Re: Anyone ever build an isobaric DB? Post by backfixer on 07/20/08 at 00:21:33 PC, i am planning on doing this when I get a larger vehicle. I had a db12 isobaric, loved it! would like to try it with in a 10" version, but what do you do about the insert size, it seems its too small as is. i just recently finished a ddb10, check it out at the new topic section. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |