Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Wicked One Support Forum >> wicked one with single 10"
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1188313701

Message started by mhtplsh on 08/28/07 at 16:08:20

Title: wicked one with single 10"
Post by mhtplsh on 08/28/07 at 16:08:20

Wicked one is designed for 2-10" DHM -108B drivers. i want to make with single driver. so what should i modify in the drawing? is there any software available so that we can do it?

Title: Re: wicked one with single 10"
Post by Bart_West-VL. on 08/28/07 at 19:16:51

Maybe this will help:
https://www.decware.com/cgi-bin/yabb2/YaBB.pl?num=1186391559#22

Do some research!
B.

Title: Re: wicked one with single 10"
Post by mhtplsh on 08/29/07 at 04:08:27

Bert_West-VL,
Thanks for ur reply.
I design was in mind the moment i saw wo drawings. But here some space is lost.
So i was thinking if somebody hv some new idea of saving the space.
In PA similar type of dual subbox is available.

Title: Re: wicked one with single 10"
Post by Blotch on 08/30/07 at 19:36:19

I posted the half WO in the two halves post. I think the loss of space in the closed chamber due to the modification is negligible. I am working on a drawing with dimensions on it, having no CAD software makes the task rather difficult. The empty space made by the one angled board on the right of the drawing should be filled with something such as expanding foam or firmly fastened with several braces to the outside wall. The completed speaker should have the outside dimensions of 24" x 24" x 13.5".

Title: Re: wicked one with single 10"
Post by mhtplsh on 08/30/07 at 20:03:40

Here is my try towards making drawing simpler for single driver.
This is just beginning. I am trying with 8" driver.
I want to reduce the height to 24"

Title: Re: wicked one with single 10"
Post by Blotch on 08/31/07 at 16:00:04

I'm confused by your drawing......in my drawing the final outside dimensions are 609.6mm square by 342.9 mm tall. In order to scale it for a 8" these dimensions need to be multiplied by .8 thus making them 487.68mm square by 274.32 mm tall. Hopefully this weekend I'll get a little time to make a drawing with dimensions in inches and mm.

Title: Re: wicked one with single 10"
Post by mhtplsh on 08/31/07 at 17:31:07

This is 10" single driver drawing.
The hornsize is 19"x12". i.e. 482.6mm X 304.8mm.
I hv mainly tried to make for rectangular.
So easy to make.
After this i will try with 8".