Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Wicked One Support Forum >> Inside baffles
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1180594480

Message started by David on 05/31/07 at 07:54:39

Title: Inside baffles
Post by David on 05/31/07 at 07:54:39

Hiya guys, just started the big build, should be fun. Just wondering, in the plans it dont actually say that all internal baffles need to be screwed to each other. I have looked at a fair few build pics from others who have had a crack at the WO and cant see any sign of screwing the baffles, u reckon just glue them together? or screw baffles to each other as well as glueing them? any info would be great :)

Title: Re: Inside baffles
Post by musgofasa on 05/31/07 at 12:50:18

I always used a brad nailer when putting mine together, but if it is built very well, glue would be sufficient I think. Still, I have never attempted it that way.

Let us know which way you go

Take care,
Robert

Title: Re: Inside baffles
Post by Adrian on 05/31/07 at 16:01:49

it's not that hard to screw them together. do it.

Title: Re: Inside baffles
Post by 60_and_up on 05/31/07 at 16:02:19

might as well throw a few nails/screws in there..i do :P

Title: Re: Inside baffles
Post by djman37 on 06/01/07 at 15:52:33

GLUE holds the joint. Screws or brads just hold the wood until the glue dries.
Wood glue; elmers or titebond, NOT liquid nails or gorilla or whatever.
If my box for 2 DD9515's and over 7200 watts doesn't need screws, neither does this.(i brad nail to keep moving along with my builds)

good luck.

Title: Re: Inside baffles
Post by David on 06/07/07 at 11:50:09

Glue and screw it is then :) Thanks for the tips