Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Deathbox Support Forum >> First build, panel D? https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1180540717 Message started by Jim on 05/30/07 at 16:58:37 |
Title: First build, panel D? Post by Jim on 05/30/07 at 16:58:37 Hey guys, I've never done a sub before and my son and I are going to attempt a Deathbox 10. I've bought plans, but the measurements on panel D don't add up. The lenghth says 7 1/2 for the cut out and 3 inches on either side and the depth or height of cut out 2 5/8 are these figures reversed? Thanks for any help. Jim and Jacob |
Title: Re: First build, panel D? Post by Jet-Lee on 05/30/07 at 17:20:25 the cutout needs to be offset from center. The edge of the cutout is 3" from one side, but not the other. |
Title: Re: First build, panel D? Post by Jim on 05/30/07 at 20:29:30 Doh! Homer Simpson strikes again. Thanks Jet-Lee |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |