Post by JRock on 03/30/07 at 06:12:24
So- I have a car, it has a trunk. I have some sealed subs in there, but can't live without the sound of my WO in my old car. Problem is, I really need to keep a little trunk space.
What do you all think about splitting a WO, fiberglassing the compression and sealed chamber into the areas on the left and right (each side would be half a WO) of my trunk and adding the horn flare to that?
Otherwise, what about a WO32 Version- basically keep the way the WO32's horn is loaded. I was thinking something like this:
Red is Fiberglassed enclosure, while Blue is all built from wood. The green is obviously the subwoofers, and the Yellow is the free space in my trunk. The reason for the slanted Blue ends is merely cosmetic.
I am willing to build a test enclosure of roughly the same size out of 3/4 MDF- but first-
What does everyone think? I believe the main difference between the WO and WO32 is the WO has a compression chamber, making it dig a little deeper. I also belive lengthening the Horn of the WO32- the picture design would do this- would lower the response and get it further to the WO I am used to.
Mainly I am looking for the increase in dynamics and sensitivity that the WO offered.
Any other ideas for a similar layout would be sweet.