Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Wicked One Support Forum >> im back...w/o 4 12's in one box
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1173842555

Message started by mrezstreet2 on 03/14/07 at 04:22:35

Title: im back...w/o 4 12's in one box
Post by mrezstreet2 on 03/14/07 at 04:22:35

k i waz thinkik adout a iso mount with 1 sub behind the other but keep em facing the same way...this should cut the sealed side needs in half, keep the sub liener and still keep the power level were i need it......what do ya think....
ps my pc was on crack and would not let me on this site forever....i missed ya guys

Title: Re: im back...w/o 4 12's in one box
Post by Adrian on 03/14/07 at 14:09:38

you could try that type of iso loading but why would you do it ? it takes a lot more space compared to clamshell loading. and clamshell will still be more linear because there's less space between the subs and they will couple better.
fyi, i'd build 2 wo's.

Title: Re: im back...w/o 4 12's in one box
Post by Jet-Lee on 03/14/07 at 15:28:22

Iso-loading both speakers facing the same direction can cause an issue. The magnet that is in the space between the cones will be hotter than the other, which can cause power handling issues.

I guess clamshelling would have a similar effect, with one vented and one not, but clamshelling still uses even less space.

Title: Re: im back...w/o 4 12's in one box
Post by mrezstreet2 on 03/15/07 at 00:12:14

well i want too put 4 12's in a/some w/o i was tryin to get 4 12's in too 1 w/o and then put 1500 watts on the motherless goats :P