Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
AUDIO FORUMS >> General Discussion and Support >> Input Transformers
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1171967106

Message started by Andy831 on 02/20/07 at 10:25:05

Title: Input Transformers
Post by Andy831 on 02/20/07 at 10:25:05

I have a 240v ZSLA which I don`t use. I also have a Select which is 110v and a Select that is 240v

My question is simple, can I swop the 240v Input transformer off the ZSLA onto the 110v Select
This seems a simple answer to sorting out my mains power conumdrum, but maybe seems too simple
to be possible.

Title: Re: Input Transformers
Post by KeithC on 02/20/07 at 13:22:23

Andy,

Maplin do a brace of step-downs:

http://www.maplin.co.uk/Module.aspx?ModuleNo=13358&&source=14&doy=20m2

At £30 or £40, better'n mutilating the ZSLA.

Title: Re: Input Transformers
Post by Andy831 on 02/20/07 at 13:37:37

Hi Keith

Just Pm`ed you with directions etc.

I already have a step down tranny for the 110v select, It was just an idea
that because i don`t use the ZSLA and it has a 240v tranny on it I wondered about
swopping it to the 110v Select so I would then have a 110v ZSLA which I don`t use
but intend to keep, and 2 / 240v Selects......... Hope that makes some sense? I was
getting confused just typing it.

Andy

Title: Re: Input Transformers
Post by Steve Deckert on 02/20/07 at 15:33:26

You definitely can swap the two transformers, no problem. [smiley=thumb.gif]

Title: Re: Input Transformers
Post by Andy831 on 02/20/07 at 17:18:36

Top Man Steve, Thanks for picking up on that.

Andy