Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Housewrecker Support Forum >> Altec 414-8E for 12" HW? https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1164403825 Message started by 46ULTRAFLEX on 11/24/06 at 20:30:25 |
Title: Altec 414-8E for 12" HW? Post by 46ULTRAFLEX on 11/24/06 at 20:30:25 Hi, this woofer has QT=0,2 ,Fs=30 and VAS=7,91 is this good to use for a 12" HW cab? I also have another GAMMA 12" , driver with QT=0,42 , Fs=25 and VAS=12 is this more useful? please help me.... thanks!/ |
Title: Re: Altec 414-8E for 12" HW? Post by paulc on 11/24/06 at 21:42:40 The glory of this design is that darn near anything works in em. It's easy to change drivers to test drive them. I've built three and used whatever subs I had around and every one made me smile. |
Title: Re: Altec 414-8E for 12" HW? Post by 46ULTRAFLEX on 11/25/06 at 10:09:49 thanks! I like to know if there is some thiele parameters that a driver should have for working good in this cab? Is there some driver 12" and 15" that is used in the original design by Mr Derkert ? please give me the name of some driver to look for. I need clean musical bass between 30-70 hz. I listen in mormal level. I do not need 120db. cheers ! |
Title: Re: Altec 414-8E for 12" HW? Post by 60ndown on 11/25/06 at 14:51:21 paulc wrote on 11/24/06 at 21:42:40:
re-read this ^ almost any driver works. if you have 12s build the hwk12, if you have 15s build the 15" version. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |