Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
OLDER DECWARE GEAR SUPPORT >> CSP, CSP2, CSP2+ >> Silly CSP2 Question
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1158664460

Message started by MAC -SteveH on 09/19/06 at 11:14:20

Title: Silly CSP2 Question
Post by MAC -SteveH on 09/19/06 at 11:14:20

Can the 2nd set of RCA outputs be used to feed a sub?
(I don't want to blow anything up)

Tnx, Steve

Title: Re: Silly CSP2 Question
Post by ado420 on 09/19/06 at 14:18:28

I don't see why not, seeing as your sub probably has line level (or low level) connections on it.

Blowing up? I don't see how that could happen, it is only unbalanced connectors, dealing very small currents and a couple of volts.

Depending on the amount of voltage coming out of your CSP2, you'll have to play around with the gain setting on your sub, turn it all the way down at first and move up slowly.

Title: Re: Silly CSP2 Question
Post by DaveCan on 09/19/06 at 14:58:17

The CSP2 has a mono out jack to feed a sub or center channel. Dave :)