Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Wicked One Support Forum >> Before I take the Chop https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1148731104 Message started by 8bit-ash on 05/27/06 at 11:58:24 |
Title: Before I take the Chop Post by 8bit-ash on 05/27/06 at 11:58:24 Ok so I've finally decided to go for 10's for the WO i've semi made. I'm getting a pair of drivers made up by a mate as I was having troubles finding what I wanted from a shop. Now heres the Question. Do I chop 2 inches off the height of my cab(panels currently 14") which will make it the correct height for a 10" driver. Or do I use the 14" panels and just make the horn mouth 12". Thus giving me a bit more volume in the chambers as its only the diddy 24" version. Only problem I can see is the size difference in the horn itself. Any help mucho appreciated. |
Title: Re: Before I take the Chop Post by Adrian D. on 05/27/06 at 13:00:01 i'm not pretty sure, but i'd say chop the extra 2". building it as close as possible to the plans is the best option. |
Title: Re: Before I take the Chop Post by Gex on 05/27/06 at 22:53:12 I agree stay as close as you can if this is your first cab in the WO. |
Title: Re: Before I take the Chop Post by 8bit-ash on 05/28/06 at 15:57:26 cool, thats what i've done then.. Its all glued and screwed and awaiting some drivers now. |
Title: Re: Before I take the Chop Post by Adrian D. on 05/28/06 at 16:06:45 tell us again what drivers are you using ? Quote:
|
Title: Re: Before I take the Chop Post by 8bit-ash on 05/29/06 at 10:59:09 I was having some made up from scratch, Sounds a bit OT but I can get them built for £60 so Its a bargain. The fellas still waiting on a shipment of casts to arrive though. So for now he's pulling apart a pair of eminence Kappas hes got and putting a new cone and rubber surround and A beefed up 3" voicecoil and motor on. quick pic- |
Title: Re: Before I take the Chop Post by jj420 on 05/29/06 at 14:39:49 its already visually appealing, hope those custom drivers work out for ya too... |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |