Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Wicked One Support Forum >> Home theater application https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1146584347 Message started by Syntige9903 on 05/02/06 at 15:39:07 |
Title: Home theater application Post by Syntige9903 on 05/02/06 at 15:39:07 I have 2 fostex fe206e rear loaded horn enclousures that play really low notes but I would like a subwoofer application to use for really low notes below 35hz. Has anyone used the 36 x 36 for this application, possibly for a home theater subwoofer. |
Title: Re: Home theater application Post by AudioNirvana on 05/03/06 at 10:27:27 I think the WO32 is more suited to home theatre, and a more managable size. |
Title: Re: Home theater application Post by HT-EXT on 05/03/06 at 13:15:23 I use the WO36(36x36) for my main sub in my HT set up. I finally ended up with Dayton HOs in it to reach the Hz I was after. The sound produce by this design is extreme. I do not have a WO32 so I am unsure which would be better. The WO36 seems to be a more forgiving design that is why I pick it, at least thats the way I understood it from the forums. With the HOs the WO peaks around 40Hz to 50Hz and at 30Hz is about -5db to -10db below the peak depending on the material used. I have yet to hook the Bass Pro to it to try and go a little lower but I am sure it will go low. The WO design (IMHO) will put out 30Hz with no problem with the correct speakers inside. Hope the info helps. HT-EXT |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |