Forums https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Housewrecker Support Forum >> Quad loading HWK12? https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1140721068 Message started by HT-EXT on 02/23/06 at 17:57:48

Title: Quad loading HWK12? Post by HT-EXT on 02/23/06 at 17:57:48 I want to quad load a HWK12 and do not like the idea of putting the speakers directly together(clamshell). What if I made a piece of 3/4 MDF with the same hole as the baffle and then make a recess to fit over the woofer that is installed in the top baffle. Next bolt the other woofer to the extra 3/4 piece. This would at least give you a 3/4 inch safety margin. Of course you would do this top and bottom. Please let me in on any good info. THANKS

Title: Re: Quad loading HWK12? Post by J_Rock on 02/23/06 at 20:21:44 Your way will work fine. The easiest way I do it is to just run bolts through the speakers and baffle and bolt them down. A speaker on each side of the baffle.

Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved.